Light up your life with the high-tech look and brilliant lighting that only Smotorcision LEDs can deliver.
Whether you’re looking for a bright, new interior or a head turning exterior,Smotorcision leading edge LED technology makes the difference.
eBay only lets us include some vehicle fitments per listing, if your vehicle does not show up on the compatibility table at the top of our listings, please do remember send messages to tell us your vehicle make, model, year and other information which is helpful to check bulb type.
For most European and newest vehicle equipped with CAN-BUS system may require load resistors to bypass the error codes or flicker issue.
-Each bulb has 15 pieces high power 3030 LED chips.
-No delay to light up, Faster on/off response time.
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required.
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car.
-LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
Used for Daytime Running Light, Fog Light ONLY. (These bulbs are not suggested to be used as headlights, no high/low beam function)
-Bulb Size: 881
-Color Temperature: 3000K Yellow
-Application: Fog Light，Driving Light，DRL
LED Chips Type: 15 Pieces 3030 SMD
-Lumens: 1800 lumens per bulb,no blind zone
-Working Voltage: DC 12V to 24V
-Lifespan: 80,000 working hours, stable quality, long service life
-Waterproof Level: IP68
-Connector Type: Plug-N-Play
-Beam Angle: 360
Availibale Bulb Size: H1 H3 H4 H7 H8 H9 H10 H11 H13 H16 9003 9004 9005 9006 9007 9008 9012 9140 9040 9145 5202 880 881 886 893 894 895 896 H6M HB1 HB2 HB3 HB4 HB5
Package Included :
2Pcs BRAND NEW LED Fog Light
Q1: Will this bulb fit my vehicle?
A: These bulbs do fit all vehicles in Compatibility.
These bulbs do fit, as long as your original bulb size is H7，even if your vehicle does not show up on the compatibility.
Q2: WARNING ABOUT POLARITY ! Neither bulbs lighting up?
A：Unlike halogen bulbs, LED are polarity sensitive.
Before you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
– if your light turns on, please proceed to install both bulbs onto your vehicle.
– if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you make the LED bulb turn on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.